This is a pretty big house for this blog, it is a whooping 500 square feet, but the design and its focus on solar are amazing! The house uses very practical materials for the external cladding.
here is an excerpt from the description
The cylinders’ design was inspired by industrial agricultural materials. The structure was made by CorTen corrugated steel as the cladding and exposed steel beams on the interior. The house takes advantage of solar gain from the steel envelope through an innovative skin-integrated solar thermal system that pre-heats hot water. Each cylinder has two operable Velux® skylights to maximize the natural lighting.
The interior was designed by combining the agricultural and industrial aesthetic through a contemporary lens. The materials chosen were considered to be eco-friendly. The primary material pallete is made from forested black locust, ash and beech hardwoods from local area. They are complemented by the use of zero off-gassing finishes throughout the entirety of the house interior. Nanawallâ„¢ systems are used as the boundary between the courtyard, bedroom, and living room, blur the distinction between interior and exterior space. The kitchen was designed to provide energy efficient cooking activities, also to combine between cooking and entertaining activities. In the bedroom, the bed is raised into a a concealed ceiling box to create an open and usable space in its footprint.
Great tips on some quick things you can do right now to help green your home and make your green go a bit further.
1. Change your light bulbs already! How many environmentalists does it take to change a light bulb? There are several answers to this joke (none of them that funny), but the real answer is: “all of them.” In your home, lighting accounts for nearly 30 percent of all electricity use. By using compact fluorescent bulbs, you can cut lighting costs by 30 to 60 percent, while improving the quality of the light and reducing environmental impact at the same time.
2. Convince your toilet to use less water. More water is consumed per person in the United States than in any other country. More than a quarter of all of the water used inside the home is flushed down the toilet, which is, literally, a waste. The toilet is the single largest user of clean drinking water inside the home, and it is also the easiest place to conserve water. Before you run out and replace your existing toilets, there are simple and effective things you can do to trick your old toilet to use less water, from flush adapters to flusher adjustments and tank tricks. And when the time comes to replace your working toilets, make sure you buy a low-flow or dual-flush model.
3. Use less water in the shower. Showers add up to nearly 20 percent of all indoor water usage and are the largest users of hot water. By simply installing a low-flow showerhead, you can save up to 4,000 gallons of water annually, and for every gallon of hot water you save, that’s gas or electricity you don’t need to use to heat it. If your average shower is 10 minutes long, upgrading your old showerheads to a low-flow model will save 25 to 55 gallons of water for every shower you take, and potentially shave 30 percent off utility bills!
4. Keep vampires at bay. In the average home, 75 percent of the electricity used to power home electronicsâ€”cable boxes, DVD players, video games, stereosâ€”is consumed while the products are turned off. That’s money that could stay in your pocket. If something is plugged into the wallâ€”a TV, a cellphone charger, an appliance- even if it’s not on, it draws electricity. We call this demand of energy “phantom loads” or, more appropriately, “vampire loads,” since they suck energy. While the amount of power used is relatively small, they can add up to more than 10 percent of your electricity bill.